Transferring MOST data over Ethernet
Ladda ner
Typ
Examensarbete för masterexamen
Master Thesis
Master Thesis
Program
Publicerad
2010
Författare
Holmström, Christoffer
Persson, Martin
Modellbyggare
Tidskriftstitel
ISSN
Volymtitel
Utgivare
Sammanfattning
The purpose of this Master's thesis is to provide a feasibility study of encapsulating and transmitting data from an FPGA for transfer across Ethernet, with the encapsulation done with a microcontroller. The data rate required is 53 Mbit/s, specified by the MOST50 standard which will be the source of the data in the final product. In addition to the streaming capabilities, basic control functionality should also be implemented. This thesis was initiated by FYI Communication who already has a product, called MCBuster, whose functionality and performance should be enhanced. It was decided that neither TCP nor UDP would be able to fulfill the transport layer requirements for the project. Therefore, a custom protocol called FYI CETP was developed on top of UDP. For performance reasons, the entire network protocol stack was developed from the ground up. To transfer data from the FPGA to the microcontroller fast enough, a parallel interface was used, called External Peripheral Interface in the Luminary LM3S9B96 microcontroller used. The FPGA, a Lattice XP2-8, is interfaced in much the same way as an external memory would be, with separate data and address buses. For the receiving end of the data stream, a heavily threaded logging and control application called PCDump was developed using Java. The project has fulfilled this goal with a broad margin, achieving a sustained transfer rate of 73 Mbit/s.
Beskrivning
Ämne/nyckelord
Datorteknik , Computer Engineering