Automatic Shape Optimization of Aerodynamic Properties of Cars.
Examensarbete för masterexamen
Please use this identifier to cite or link to this item:
There are no files associated with this item.
|Type: ||Examensarbete för masterexamen|
|Title: ||Automatic Shape Optimization of Aerodynamic Properties of Cars.|
|Authors: ||Helgason, Eysteinn|
|Abstract: ||An automatic shape optimization process with the aim to improve the aerodynamic properties of cars is described in the following sections. The AVL FIRE code is used for mesh generation and CFD calculations. Sculptor is used for mesh deformation and the design environment modeFrontier is used for optimization. The optimization algorithms Simplex and Evolution Strategies, for nonlinear optimization problems, are used to achieve an optimal solution in an automatic optimization process. The rear end of the car is modifed, frst with one parameter, then two. Both single- and multi-objective optimization is performed, minimizing first drag and then both drag and lift. Comparison is made between steady k-epsilon and LES turbulence models resulting in two different optimal geometries. Using k-epsilon drag was reduced by 1.3% with increased lift of 38% while using LES drag was reduced by 13% and lift by 26 %. The process has been shown to work for multi-objective optimization. Other optimization algorithms can be used easily. The process is not restricted to optimization of drag or lift but can be modified to other ow quantities related to e.g. cross-wind stability, aero-acoustics, e.t.c.|
|Keywords: ||Energi;Hållbar utveckling;Transport;Strömningsmekanik;Energy;Sustainable Development;Transport;Fluid mechanics|
|Issue Date: ||2009|
|Publisher: ||Chalmers tekniska högskola / Institutionen för tillämpad mekanik|
Chalmers University of Technology / Department of Applied Mechanics
|Collection:||Examensarbeten för masterexamen // Master Theses|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.