Construction of an inductive charging station

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/211399
Download file(s):
File Description SizeFormat 
211399.pdfFulltext5.33 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEkman, Christian
dc.contributor.authorPetersson, Carl
dc.contributor.departmentChalmers tekniska högskola / Institutionen för energi och miljösv
dc.contributor.departmentChalmers University of Technology / Department of Energy and Environmenten
dc.date.accessioned2019-07-03T13:35:33Z-
dc.date.available2019-07-03T13:35:33Z-
dc.date.issued2014
dc.identifier.urihttps://hdl.handle.net/20.500.12380/211399-
dc.description.abstractAn inductive charging station has been designed, constructed and is operational. It is able to transfer roughly 500W to the receiving side with a peak efficiency of approximately 85%. The system was fed with a voltage between 24 to 63V from a Direct Current (dc) supply. Then, it converted the dc voltage to a high frequency Alternating Current (ac) voltage. The ac voltage was fed to the coils which transferred the energy to the receiving side and to the resonance circuit. The conversion from ac to dc was made with the body diodes in the transistors.
dc.language.isoeng
dc.setspec.uppsokLifeEarthScience
dc.subjectEnergi
dc.subjectElkraftteknik
dc.subjectEnergy
dc.subjectElectric power engineering
dc.titleConstruction of an inductive charging station
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.