Options for closing the loop for plastic debris - Environmental analysis of beach clean-up and waste treatments

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/248989
Download file(s):
File Description SizeFormat 
248989.pdfFulltext4.09 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Options for closing the loop for plastic debris - Environmental analysis of beach clean-up and waste treatments
Authors: Cañete Vela, Isabel
Abstract: Plastic debris (PD) is one of the biggest pollution problems in the marine environment. Nets, ropes, packaging, and pellets are the most common items that are spread around the world’s oceans causing an impact on wildlife and human health, and economic loss. Although mitigation is tantamount, the question remains for what can be done with the plastics that are already in the oceans. We conducted a literature review of research on debris and plastics waste management. Studies as shown that much of the collected marine debris goes to landfilling because it is little-known, diverse, salty, and too dirty for both incineration and recycling. Also, it showed that there is a strong focus on describing the environmental problems of marine and plastic debris, and that plastic debris is described in natural science terms that the waste management industry cannot use for determining suitable treatments. In order to better translate beach debris data into waste management data, we have collected beach debris from the Swedish West coast and conducted physical and chemical analyses for the characterization of the debris in waste management terms. Based on this data and the literature review, we have identified several recycling options for the PD. To identify environmental pros and cons with the different treatments, we conducted a life cycle assessment (LCA) comparing mechanical, feedstock recycling and energy recovery to establish an appropriate and practical approach towards closing the loop for PD. These treatment options were analysed in the context of two clean-up operations. The analyses suggest that mechanical treatments are not suitable for most plastics (due to they are fragmented, degraded and with a wide range of additives) whereas chemical treatments are suggested as a suitable solution. Feedstock recycling allows the production of raw material, as well as it may have fewer emissions, in comparison with combustion or landfilling which have higher emissions per tonne of PD. Finally, the LCA of two clean-up operations were performed, using the data obtained in the previous processes to see the big picture: observing the ecological benefits of removing this debris, and seeing whether that benefit is juxtaposed according to the recycling option. Although the environmental profits are difficult to quantify, the LCA results suggest that the clean-up process can have a positive impact with both mechanical and feedstock recycling, as long as the operation itself has low emissions (e.g. reducing transport emissions of the volunteers).
Keywords: Annan naturvetenskap;Other Natural Sciences
Issue Date: 2017
Publisher: Chalmers tekniska högskola / Institutionen för energi och miljö
Chalmers University of Technology / Department of Energy and Environment
Series/Report no.: Report - Division of Environmental Systems Analysis, Chalmers University of Technology : 2017:4
URI: https://hdl.handle.net/20.500.12380/248989
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.