Electrical limiting factors for wind energy installations

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/164485
Download file(s):
File Description SizeFormat 
164485.pdfFulltext1.93 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Electrical limiting factors for wind energy installations
Authors: Lundberg, Stefan
Abstract: In this thesis the electrical limiting factors for installation of wind turbines stated by the Swedish connecting requirements, AMP, have been used to determine which types of power quality problems that will dominate when fix-speed wind turbines are installed. The main limiting factors are static voltage level influence and the flicker emissions. The investigation is based on field measurements on a stall-regulated and on a pitch-regulated wind turbine. It is found that the limiting factor from the power quality point of view is the flicker emissions if one turbine is installed. If three or more turbines are installed it is the static voltage variations that sets the limit, if the summation formula from AMP is used. It is found that the XR-ratio of the grid plays a very large influence on the installation possibility, and a ratio of 1.3-2.8 is the most favourable, depending on the short circuit ratio. The results shown in this thesis can be used to determine if there will be any problem with the static voltage level or the flicker emissions when stall-regulated wind turbines are connected to the network.
Keywords: Elkraftteknik;Electric power engineering
Issue Date: 2000
Publisher: Chalmers tekniska högskola / Institutionen för elteknik
Chalmers University of Technology / Department of Electric Power Engineering
URI: https://hdl.handle.net/20.500.12380/164485
Collection:Examensarbeten för masterexamen // Master Theses

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.