Electromechanical actuator for car safety belt locking

Examensarbete på grundnivå

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/192839
Download file(s):
There are no files associated with this item.
Type: Examensarbete på grundnivå
Title: Electromechanical actuator for car safety belt locking
Authors: Lind, Robert
ELIASSON, NIKLAS
Abstract: The purpose was to find an electromechanical actuator that could replace today’s mechanical actuator that lock a car’s safety belt in case of an emergency. The actuator has to pass a list of requirements. Electromechanical actuators were studied and compared in order to find the best option for the assignment. Solenoids were proven to be the best option. A solenoid from Kuhnke was chosen to take into prototype testing. Most requirements were met with the prototype. The actuation speed of 5ms was not quite met however. With further improvements to the prototype an actuation speed of 5ms might be achievable. A life span test of more than 3 000 000 cycles were made without any detectable deformations of the prototype.
Keywords: Övrig elektroteknik, elektronik och fotonik;Inbäddad systemteknik;Transport;Other electrical engineering, electronics and photonics;Embedded Systems;Transport
Issue Date: 2013
Publisher: Chalmers tekniska högskola / Institutionen för mikroteknologi och nanovetenskap
Chalmers University of Technology / Department of Microtechnology and Nanoscience
URI: https://hdl.handle.net/20.500.12380/192839
Collection:Examensarbeten på grundnivå // Basic Level Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.