Truck tyre model based on two coupled orthotropic layers
Examensarbete för masterexamen
Please use this identifier to cite or link to this item:
There are no files associated with this item.
|Type: ||Examensarbete för masterexamen|
|Title: ||Truck tyre model based on two coupled orthotropic layers|
|Authors: ||Dinkova, Penka|
|Abstract: ||Modeling truck tyre for the needs of prediction of tyre-road noise over a wide frequency range is investigated. An existing 3-D tyre model based on two coupled orthotropic elastic layers is studied. It is applied for truck tyres. The model considers the tyre as made of two layers - tread and belt. They are under high tension due to the inflation pressure. The geometry of the tyre is represented as a plate with uniform thickness. In the width it includes the sidewalls and the belt of the tyre. Derivation of material properteis for the model based on measurements of point and transfer mobility is done. The influence of the measurement set-up to the results is discussed also. At the end, discussion of the results and conclusions are made.|
|Keywords: ||Samhällsbyggnadsteknik;Civil Engineering|
|Issue Date: ||2004|
|Publisher: ||Chalmers tekniska högskola / Institutionen för teknisk akustik|
Chalmers University of Technology / Department of Applied Acoustics
|Series/Report no.: ||Rapport E - Chalmers tekniska högskola, Avdelningen för teknisk akustik. : E04-16|
|Collection:||Examensarbeten för masterexamen // Master Theses|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.