PLL Design at 5.8 GHz

dc.contributor.authorBanik, Biddut
dc.contributor.departmentChalmers tekniska högskola / Institutionen för mikroteknologi och nanovetenskapsv
dc.contributor.departmentChalmers University of Technology / Department of Microtechnology and Nanoscienceen
dc.date.accessioned2019-07-03T11:56:11Z
dc.date.available2019-07-03T11:56:11Z
dc.date.issued2003
dc.description.abstractPLL (Phase Locked Loop) with low phase noise is a prerequisite for a communication system. Besides serving the general purposes as in cell phones, PLL is used in the ISM Bands for other special purposes incorporated with other devices. A double-PLL, generates two signals, at the ISM Band 5.8 GHz can be used for many purposes. ETC (Electronic Toll Collection), Traffic Control, thickness measurement are some examples that use ISM bands. The project s aim is to investigate and design a Double PLL at 5.8 GHz which can be used as a part of the system that would measure the thickness of slag in an Iron furnace. Further investigation and design should take place as per necessity. The components used, should hold pronounced commercial perspectives and availability. Based on the investigation results, proper components were selected to design a Single PLL at 5.8 GHz which was followed by a Double PLL at 5.8 GHz. Further investigations were conducted to attain information about commercially available VCOs, followed by a feasibility study of the commercial perspectives. Detailed considerations regarding VCOs led to the way to design VCOs at 5.8 GHz and 9.9 GHz.
dc.identifier.urihttps://hdl.handle.net/20.500.12380/22820
dc.language.isoeng
dc.setspec.uppsokPhysicsChemistryMaths
dc.subjectElektronisk mät- och apparatteknik
dc.subjectÖvrig elektroteknik, elektronik och fotonik
dc.subjectElectronic measurement and instrumentation
dc.subjectOther electrical engineering, electronics and photonics
dc.titlePLL Design at 5.8 GHz
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Ladda ner