Ethernet to HDMI Gateway - A way to transfer video data over long distance

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/155444
Download file(s):
File Description SizeFormat 
155444.pdfFulltext5.84 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Ethernet to HDMI Gateway - A way to transfer video data over long distance
Authors: Kekkonen, Simon
Abstract: Today the demands on electronic products are constantly increasing. This project deals with transmission of video data, especially over long distance. A device that could be able to increase the length from about 7 m to about 100 m when sending video was to be designed in this project. The task was to extend the length of a HDMI cable. The idea was to convert the signal from HDMI to Ethernet frames and sent it as Ethernet frames over a longer distance and then convert back to HDMI. In this project the Ethernet to HDMI conversion was designed. The device was based on a FPGA and should be able to receive Ethernet frames with video data and sends out the video data as a HDMI signal. The result is not so good, but it is easily seen from the results that the device receives Ethernet frames and then sends out the data to a screen.
Keywords: Datorteknik;Informations- och kommunikationsteknik;Computer Engineering;Information & Communication Technology
Issue Date: 2011
Publisher: Chalmers tekniska högskola / Institutionen för data- och informationsteknik (Chalmers)
Chalmers University of Technology / Department of Computer Science and Engineering (Chalmers)
URI: https://hdl.handle.net/20.500.12380/155444
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.