Design of a 2.5kW DC/DC fullbridge converter

Examensarbete för masterexamen

Använd denna länk för att citera eller länka till detta dokument: https://hdl.handle.net/20.500.12380/173958
Ladda ner:
Fil Beskrivning StorlekFormat 
173958.pdfFulltext1.26 MBAdobe PDFVisa
Typ: Examensarbete för masterexamen
Master Thesis
Titel: Design of a 2.5kW DC/DC fullbridge converter
Författare: Andersson, Christian
Sammanfattning: In this thesis, an isolated 2.5kW fullbridge DC/DC converter has been designed and analyzed regarding its efficiency and weight. By increasing the switching frequency, the magnetic components in the converter can be made smaller, in this thesis a switching frequency of 20 kHz has been compared with a switching frequency of 100 kHz. The transformer in the converter can be winded in different ways which will affect the rectification on the low voltage side, this thesis has analyzed the center-tap- and fullwave-bridge -rectification. Efficiency improvement-techniques such as zero voltage switching, ZVS, and synchronous rectification have also been analyzed. It was found that by going from 20 kHz to 100 kHz the converter weight can be reduced by approximate 10% and by using the center-tap- instead of fullwave-bridge –rectification the efficiency can improve by approximately 1-3%, from around 94% up to approximately 97% efficiency.
Nyckelord: Elkraftteknik;Electric power engineering
Utgivningsdatum: 2011
Utgivare: Chalmers tekniska högskola / Institutionen för energi och miljö
Chalmers University of Technology / Department of Energy and Environment
URI: https://hdl.handle.net/20.500.12380/173958
Samling:Examensarbeten för masterexamen // Master Theses



Materialet i Chalmers öppna arkiv är upphovsrättsligt skyddat och får ej användas i kommersiellt syfte!