Design of a 2.5kW DC/DC fullbridge converter

Examensarbete för masterexamen

Please use this identifier to cite or link to this item:
Download file(s):
File Description SizeFormat 
173958.pdfFulltext1.26 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAndersson, Christian
dc.contributor.departmentChalmers tekniska högskola / Institutionen för energi och miljösv
dc.contributor.departmentChalmers University of Technology / Department of Energy and Environmenten
dc.description.abstractIn this thesis, an isolated 2.5kW fullbridge DC/DC converter has been designed and analyzed regarding its efficiency and weight. By increasing the switching frequency, the magnetic components in the converter can be made smaller, in this thesis a switching frequency of 20 kHz has been compared with a switching frequency of 100 kHz. The transformer in the converter can be winded in different ways which will affect the rectification on the low voltage side, this thesis has analyzed the center-tap- and fullwave-bridge -rectification. Efficiency improvement-techniques such as zero voltage switching, ZVS, and synchronous rectification have also been analyzed. It was found that by going from 20 kHz to 100 kHz the converter weight can be reduced by approximate 10% and by using the center-tap- instead of fullwave-bridge –rectification the efficiency can improve by approximately 1-3%, from around 94% up to approximately 97% efficiency.
dc.subjectElectric power engineering
dc.titleDesign of a 2.5kW DC/DC fullbridge converter
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
Collection:Examensarbeten för masterexamen // Master Theses

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.