How lateral movement affects front seat passengers

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/257179
Download file(s):
File Description SizeFormat 
257179.pdfFulltext5.25 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: How lateral movement affects front seat passengers
Authors: Andersson, Agnes
Olander, Anna
Abstract: ABSTRACT The development in the car industry is going towards autonomous cars where the border between a driver and a passenger is gradually diminished. In the future the driver will be more similar to a passenger since the driving will be outsourced to the car. There is a knowledge gap regarding the front seat passenger that needs to be filled with information. The passenger does not like the driver keep track of the road or use the steering wheel for support while riding in turns. Therefor they are likely to be more exposed to the lateral acceleration and lateral movement in turns. The aim of this thesis was to investigate how lateral movement affect the front seat passenger. In order to do this three studies were conducted, including one pre-study to set the knowledge foundation and to find critical user groups and roads. The smaller tests that constituted the pre-study included a lot of driving and collecting velocities, lateral acceleration and estimated lateral movement. Among other things the pre-study resulted in a definition of normal driving in turns and a route for user study one, including interesting turns to investigate. Lastly, it resulted in an evaluation of the parameters affecting lateral movement on the front seat passenger and four parameters were chosen for user study one, body height, BMI, velocity and type of turn. The result from the pre-study was used to design user study one, a user study including 26 participants with varying heights and BMI traveling in the front seat in a real traffic environment. The subjects were video recorded and interviewed which resulted in both quantitative and subjective data to analyse. The conclusion from user study one was that short people are most exposed to lateral movement in turns and the type of turns that generate the most lateral movement was found to be roundabouts driven in 28 km/h. One unexpected insight was that many of the subjects supported themselves on the mid panel and on the side support which decreased their lateral movement. This was mostly done by tall people which can partly explain why they were exposed to less lateral movement. User study two focused on a critical user group and velocity, short people riding in 28 km/h, with 14 participants. The aim of this user study was to investigate how lateral movement of the front seat passenger is affected by road awareness, the ability to use support from the middle and side panels and lastly to evaluate a pre-pretensioning belt concept with the purpose to decrease lateral movement. This test was executed on a test route to ensure repeatability and efficiency. The subjects got assignments to do while riding in the turn to decrease their road awareness and take away the ability to support themselves on the side panels. During the test the subjects were also exposed to a tension belt during some of the turns to investigate their attitude towards it and whether it decreases lateral movement. The assignments did not increase lateral movement but most subjects did not appreciate doing activities while turning. None of the pre-pretensioning belts decreased lateral movement and the subject’s attitudes towards them were scattered. The study concluded in that lateral movement does sometimes result in non-optimal body positions but does not decrease the ride comfort during normal drive. If the passenger is doing an activity while riding in a turn, lateral movement decreases comfort and execution efficiency, something that needs to be further investigated in future studies to ensure high ride comfort for drivers of autonomous cars. There is a vast amount of ways to decrease lateral movement without decreasing velocity and only one was tested in this study. If the tension belt is to be further investigated, a stronger force should be applied and it is important that it is optional to use, since the experience of it is highly individual.
Keywords: Produktion;Innovation och entreprenörskap (nyttiggörande);Annan teknik;Production;Innovation & Entrepreneurship;Other Engineering and Technologies
Issue Date: 2019
Publisher: Chalmers tekniska högskola / Institutionen för industri- och materialvetenskap
Chalmers University of Technology / Department of Industrial and Materials Science
URI: https://hdl.handle.net/20.500.12380/257179
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.