Mutually commutated converter equipped with thyristor-based cycloconverter

Examensarbete för masterexamen

Använd denna länk för att citera eller länka till detta dokument:
Ladda ner:
Fil Beskrivning StorlekFormat 
ZhaoShuangMsc.pdfFulltext1.08 MBAdobe PDFVisa
82849.pdfFulltext983.02 kBAdobe PDFVisa
Typ: Examensarbete för masterexamen
Master Thesis
Titel: Mutually commutated converter equipped with thyristor-based cycloconverter
Författare: Zhao, Shuang
Sammanfattning: The switching losses of power conversion systems can be significantly reduced by use of the proposed mutually commutated converter topologies which equipped with IGBT-based cycloconverters and permit soft switching of all semiconductor valves in all operating points without any auxiliary valves. However, due to the inherent properties, thyristors are more suitable and attractive for such naturally commutated converters. A simplified three phase power conversion system is studied in this thesis where the load side is represented by counter-emf. The aim of the thesis is to find a feasible way which allows the thyristor-based cycloconverter to be commutated at any instant of each modulation interval. With this purpose, the method should be able to overcome the inherit limitation of the thyristor, which is the lack of turn-off capability. A proposed modulation method named “current clamping control strategy” for wind farms is studied and analyzed using in different operating points in this thesis. Furthermore, the cascaded topology is discussed to show the superiority with respect to the total harmonic distortion.
Nyckelord: Elkraftteknik;Electric power engineering
Utgivningsdatum: 2008
Utgivare: Chalmers tekniska högskola / Institutionen för energi och miljö
Chalmers University of Technology / Department of Energy and Environment
Samling:Examensarbeten för masterexamen // Master Theses

Materialet i Chalmers öppna arkiv är upphovsrättsligt skyddat och får ej användas i kommersiellt syfte!