Environmentally Friendly Nitriding for Valves in Hydrogen Internal Combustion Engine
Loading...
Date
Authors
Type
Examensarbete för masterexamen
Master's Thesis
Master's Thesis
Programme
Model builders
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Hydrogen-fueled internal combustion engines (ICEs) represent a promising nextgeneration
propulsion technology. Engine valves are critical components that require
high strength and wear resistance, properties commonly enhanced through surface
hardening/nitriding. Conventional hard chromium (Cr6+) coatings are increasingly
being phased out due to environmental and health concerns associated with the
(Cr6+) containing electroplating process. This thesis investigates environmentally
friendly nitriding technologies as alternatives for engine valves used in hydrogenfueled
ICEs developed by TRATON Group R&D. Gas nitriding and plasma nitriding
were applied to two valve materials: the austenitic 3015 alloy and the martensitic
X45CrSi9-3 steel, both used for valve stems.
The study combined optical microscopy, SEM, EBSD, microhardness testing, hydrogen
content analysis, slow strain rate tensile testing, and fracture surface analysis.
As-received valves were examined first to evaluate the differences in nitriding layer
forms by gas nitriding and plasma nitriding. The influence of the nitriding layer
on microstructure and hydrogen uptake was studied. Subsequently, the tensile test
samples extracted from the valve were sent to Bodycote for re-nitriding by a gaseous
method. Hydrogen was then introduced electrochemically to the samples with and
without nitriding. The influence of gas nitriding on mechanical behavior was further
investigated and compared.
The results showed that nitrided surface layers were formed in both nitriding processes,
but the layer thickness and uniformity depended on both the substrate material
and the nitriding process. Gas nitriding generally produced a thicker layer,
while plasma nitriding gave a thinner and more geometry-dependent layer. Hydrogen
analysis indicated that 3015 retained more hydrogen than X45CrSi9-3, and
hydrogen uptake caused a pronounced loss of ductility, especially in X45CrSi9-3.
Fractography showed that nitrided specimens developed thinner hydrogen-affected
brittle zones than unnitrided specimens, suggesting that nitriding can help restrict
hydrogen-assisted fracture. However, the re-nitrided tensile specimens also showed
that an overly thick or uneven nitrided layer can reduce plasticity even without
hydrogen uptake, highlighting the need for process optimization.
Overall, the thesis shows that nitriding may improve the surface performance of
engine valves for hydrogen applications, but the treatment window must be carefully
controlled to balance hardness, layer thickness, and resistance to hydrogen
embrittlement.
Description
Keywords
3015 Alloy, X45CrSi9-3 steel, Engine valve, Plasma Nitriding, Gas Nitriding, Electrochemical Charging, TDS, Hydrogen Embrittlement
