Characterisation and Control of a Permanent Magnet Synchronous Machine during Open Circuit Fault

Visa enkel post
dc.contributor.authorAhlqvist, Erik
dc.contributor.authorNilsved, Jonatan
dc.contributor.departmentChalmers tekniska högskola / Institutionen för energi och miljösv
dc.contributor.departmentChalmers University of Technology / Department of Energy and Environmenten
dc.date.accessioned2019-07-03T13:48:10Z
dc.date.available2019-07-03T13:48:10Z
dc.date.issued2015
dc.description.abstractThis thesis describes a complete setup of an electric driveline consisting of a permanent magnet synchronous machine, PMSM, converter and a control system. In order to model the system, the parameters of the selected machine parameters needed to be characterised. Comparison between the simulations and tests confirmed that the parametrisation was accurate and the system could be operated in both motor and generator mode. Moreover, simulations of an open circuit fault was performed and a resonant controller implemented to reduce the torque ripple which occurred due to the fault. Similar tests was performed in the lab-setup, which confirmed that the machine was able to continue to operate during an open circuit fault using only a PI-controller if the wye node current is controlled. The same resonant controller was implemented in the control system in the lab, however, due to high frequency noise in the current measurements, it became unstable. As a replacement, a look-up table using the output from the simulated resonant controller was implemented which lowered the torque ripple significantly. From this it is concluded that the resonant controller shows very good performance in simulations and would theoretically do so in lab implementation. However, a real implementation is very hard to achieve, even though the look-up table version did lower the torque ripple significantly.
dc.identifier.urihttps://hdl.handle.net/20.500.12380/222065
dc.language.isoeng
dc.setspec.uppsokLifeEarthScience
dc.subjectElkraftteknik
dc.subjectElectric power engineering
dc.titleCharacterisation and Control of a Permanent Magnet Synchronous Machine during Open Circuit Fault
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
local.programmeElectric power engineering (MPEPO), MSc
Ladda ner
Original bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
222065.pdf
Storlek:
10.4 MB
Format:
Adobe Portable Document Format
Beskrivning:
Fulltext
Ladda ner
Samling
Examensarbeten för masterexamen