Precision in Metal Additive Manufacturing Using Laser Powder Bed Fusion

Hämtar...
Bild (thumbnail)

Publicerad

Författare

Typ

Examensarbete för masterexamen
Master's Thesis

Modellbyggare

Tidskriftstitel

ISSN

Volymtitel

Utgivare

Sammanfattning

Laser Powder Bed Fusion (PBF-LB) is the most widespread metal additive manufacturing technology, enabling complex metallic components with high design freedom for high-precision applications. However, achieving sufficient dimensional accuracy and surface quality remains a challenge, particularly for geometrically sensitive features where the final geometry is strongly influenced by contour (border) scan tracks. This thesis investigates the influence of contour-related process parameters, including contour laser power, scan speed, beam compensation, and number of border passes, on dimensional accuracy and side-skin surface characteristics in PBF-LB manufacturing of 316L stainless steel. Benchmark geometries and test coupons, based on features relevant to nuclear components, were used to represent the geometric conditions of interest to the targeted industrial application. The specimens were manufactured on an SLM 280 system at RISE (Research Institutes of Sweden). A tiered design of experiments approach was combined with dimensional and surface measurements, and statistical analysis to investigate how contour parameters and feature geometry govern the resulting deviation. Beam compensation was the dominant factor, shifting dimensions by approximately ±2 mm per mm of applied offset, with opposite effects on internal and external features. Contour scan speed was about four times weaker, and contour laser power was not significant within the tested range. The dimensional error remained constant −0.05 to −0.07 mm regardless of feature size, so the larger relative error on thinner walls reflects percentage scaling rather than a physical size effect. No single compensation value suited both feature classes, with suitable values ranging from 0.026 to 0.108 mm. Confocal measurements showed the same division, internal bore surfaces being rougher than external walls with mean Sa about 1.9 μm higher. Overall, the results show that the effect of contour parameters depends strongly on feature geometry. The identified relationships and compensation guidelines provide a foundation for further process development within the ongoing industrial collaboration at RISE, as well as for subsequent validation and application to more complex and production-scale components.

Beskrivning

Ämne/nyckelord

Laser Powder Bed Fusion, Additive Manufacturing, Dimensional Accuracy, Contour Parameters, Surface Quality, Beam Compensation, Design of Experiments, Process Optimisation

Citation

Arkitekt (konstruktör)

Geografisk plats

Byggnad (typ)

Byggår

Modelltyp

Skala

Teknik / material

Index

Endorsement

Review

Supplemented By

Referenced By