Co-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna

dc.contributor.authorHallman, Viktor
dc.contributor.authorSanford, Erik
dc.contributor.departmentChalmers tekniska högskola / Institutionen för mikroteknologi och nanovetenskapsv
dc.contributor.departmentChalmers University of Technology / Department of Microtechnology and Nanoscienceen
dc.date.accessioned2019-07-03T13:11:47Z
dc.date.available2019-07-03T13:11:47Z
dc.date.issued2013
dc.description.abstractA novel technique to co-design a push-pull power amplifier and a wideband omnidirectional antenna has been investigated. The goal was to cover the frequency range from 750 MHz to 3 GHz. A biconical antenna has been simulated in Ansys HFSS and the resulting parameters were exported to AWR Microwave Office, where the remaining part of the co-design was performed. The complete design resulted in simulated values of a total gain of 11+/-1 dB and a PAE of 35% and a maximum output power of 47 dBm. The main focus of the project was to overcome the problems entailed with abandoning the standardised interface. Leaving to common interface required new, non-standardised, methods to conduct simulations.
dc.identifier.urihttps://hdl.handle.net/20.500.12380/179652
dc.language.isoeng
dc.setspec.uppsokPhysicsChemistryMaths
dc.subjectElektroteknik och elektronik
dc.subjectInformations- och kommunikationsteknik
dc.subjectElektronik
dc.subjectElectrical Engineering, Electronic Engineering, Information Engineering
dc.subjectInformation & Communication Technology
dc.subjectElectronics
dc.titleCo-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
local.programmeWireless, photonics and space engineering (MPWPS), MSc
Ladda ner
Original bundle
Visar 1 - 1 av 1
Hämtar...
Bild (thumbnail)
Namn:
179652.pdf
Storlek:
22.95 MB
Format:
Adobe Portable Document Format
Beskrivning:
Fulltext