Stability of High Speed Train under Aerodynamic Excitations

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/134032
Download file(s):
File Description SizeFormat 
134032.pdfFulltext6.47 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBjerklund, Erik
dc.contributor.authorÖhman, Mikael
dc.contributor.departmentChalmers tekniska högskola / Institutionen för tillämpad mekaniksv
dc.contributor.departmentChalmers University of Technology / Department of Applied Mechanicsen
dc.date.accessioned2019-07-03T12:31:36Z-
dc.date.available2019-07-03T12:31:36Z-
dc.date.issued2009
dc.identifier.urihttps://hdl.handle.net/20.500.12380/134032-
dc.description.abstractIt is important to study the aerodynamic effects on high speed trains, due to both comfort and stability. The Swedish high speed trains are aiming to go at a speed of 250 km/h. The present work closely connects the aerodynamic effects with the vibration dynamics within the train. Two scenarios are simulated, two trains meeting each other and a train leaving a tunnel and is hit by a strong wind gust (35 m/s). From the aerodynamic part, computational fluid dynamics (CFD) is used with the k-ζ-f turbulence model. To simulate both scenarios a moving mesh needs to be used. From the CFD the moments and forces from the pressure and traction on the train body are calculated, and these loads are taking into a low order mathematical model that simulates the vibration dynamics in the train. For the scenario with meeting trains the train experiences some slight vibrations,causing discomfort, but has no impact on the stability of the train, but for the scenario with the tunnel and side wind the train has a very high risk of derailment. From the results of the dynamics simulations a comfort and stability measurements were constructed based on the vibrations in the train car and the risk of wheel climbing. From simulating different speeds of the train it could be seen that the comfort and stability change linearly with the speed. Work was also done to see how much impact the coupling between the car bodies can have on the comfort and stability. A comparison was made to a simple, stiff coupling and one that optimizes a set of passive dampers. It's seen that the coupling can make a difference of around 8% in comfort and stability, which equals an effect of lowering the speed 3-5 m/s. Semi-active dampers of sky-hook and ground-hook type were also tested in the coupling, but they only showed insignificant changes or changes to the worse.
dc.language.isoeng
dc.relation.ispartofseriesDiploma work - Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden : 2009:03
dc.setspec.uppsokTechnology
dc.subjectHållbar utveckling
dc.subjectFastkroppsmekanik
dc.subjectFarkostteknik
dc.subjectStrömningsmekanik
dc.subjectTransport
dc.subjectSustainable Development
dc.subjectSolid mechanics
dc.subjectVehicle Engineering
dc.subjectFluid mechanics
dc.subjectTransport
dc.titleStability of High Speed Train under Aerodynamic Excitations
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.