Investigation of propeller characteristics with different locations of the rudder

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/148380
Download file(s):
File Description SizeFormat 
148380.pdfFulltext10.87 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Investigation of propeller characteristics with different locations of the rudder
Authors: Jamali, Arash
Abstract: In designing a ship, propulsive efficiency is a parameter which always is tried to be kept as optimum as possible. An investigation in full scale and model scale of a ship including propeller and rudder, regarding the effect of changing rudder position on variation of propeller characteristics has been carried out. SHIPFLOW software was utilized to apply Computational Fluid Dynamic (CFD) techniques in order to compute the flow around the ship hull, propeller and rudder. Lifting line method which is coupled with RANS solver module of SHIPFLOW is used to simulate and also compute the propeller characteristics. Five different longitudinal rudder positions were investigated and compared to each other in order to determine the optimum longitudinal position of rudder. Furthermore, in model scale, for optimum longitudinal rudder position, one different transverse position of rudder was also evaluated. For computing propeller characteristics, SELFPROPULSION command was applied into computations in order to achieve balance between drag and thrust by adjusting the shaft RPM. In order to evaluate the accuracy of results for these two different scales, computed results for original rudder position in model scale and full scale were compared with test results and predicted results by ITTC 1978 method, respectively. Computed results in model scale, thrust and torque, show a good agreement with test results but obtained results from computations for full scale, such as delivered power and effective power seem to be over predicted compared to predicted results by ITTC 1978 method. Consequently, optimum rudder position was determined based on model scale results which are reasonably accurate compared to full scale computed results. The reason which made full scale computation results over predicted can be described regarding to grid resolution at the aft part of ship hull which is not compatible with propeller grids. This causes inaccurate interpolation between propeller and hull/rudder grids which concludes over predicted results for full scale.
Keywords: Transport;Farkostteknik;Transport;Vehicle Engineering
Issue Date: 2011
Publisher: Chalmers tekniska högskola / Institutionen för sjöfart och marin teknik
Chalmers University of Technology / Department of Shipping and Marine Technology
Series/Report no.: Report. X - Department of Shipping and Marine Technology, Chalmers University of Technology, Göteborg, Sweden : 253
URI: https://hdl.handle.net/20.500.12380/148380
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.