Överföring av och beräkning med timmätta värden – från MT2000 till Xpower

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/174133
Download file(s):
File Description SizeFormat 
174133.pdfFulltext1.54 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Överföring av och beräkning med timmätta värden – från MT2000 till Xpower
Authors: Pålsgård, Sven
Abstract: New technology makes it possible to remotely measure all consumers in a power network on an hourly basis and store the values in a database. This thesis work describes the conversion process between automatic meter reading system MActor and calculation software Xpower. Then the possible differences between calculations of power networks using load curves in combination with a yearly estimate of consumption and calculations using hourly measured values is examined. The result of the comparison shows that, for the power network under inspection, no significant difference could be noticed. This does not mean that calculations using hourly measured values would be unnecessary. I believe that in a near future calculations using hour measurements will be the primary choice for many power companies to whom technology is available. Also some basic calculations of fundamental power network parameters, such as power factor and loses, are presented using hourly measured distribution transformers in combinations with its hourly measured loads. The report is written in Swedish
Keywords: Elkraftteknik;Electric power engineering
Issue Date: 2008
Publisher: Chalmers tekniska högskola / Institutionen för energi och miljö
Chalmers University of Technology / Department of Energy and Environment
URI: https://hdl.handle.net/20.500.12380/174133
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.