Co-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/179652
Download file(s):
File Description SizeFormat 
179652.pdfFulltext23.5 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Co-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna
Authors: Hallman, Viktor
Sanford, Erik
Abstract: A novel technique to co-design a push-pull power amplifier and a wideband omnidirectional antenna has been investigated. The goal was to cover the frequency range from 750 MHz to 3 GHz. A biconical antenna has been simulated in Ansys HFSS and the resulting parameters were exported to AWR Microwave Office, where the remaining part of the co-design was performed. The complete design resulted in simulated values of a total gain of 11+/-1 dB and a PAE of 35% and a maximum output power of 47 dBm. The main focus of the project was to overcome the problems entailed with abandoning the standardised interface. Leaving to common interface required new, non-standardised, methods to conduct simulations.
Keywords: Elektroteknik och elektronik;Informations- och kommunikationsteknik;Elektronik;Electrical Engineering, Electronic Engineering, Information Engineering;Information & Communication Technology;Electronics
Issue Date: 2013
Publisher: Chalmers tekniska högskola / Institutionen för mikroteknologi och nanovetenskap
Chalmers University of Technology / Department of Microtechnology and Nanoscience
URI: https://hdl.handle.net/20.500.12380/179652
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.