Co-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna

Examensarbete för masterexamen

Please use this identifier to cite or link to this item:
Download file(s):
File Description SizeFormat 
179652.pdfFulltext23.5 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHallman, Viktor
dc.contributor.authorSanford, Erik
dc.contributor.departmentChalmers tekniska högskola / Institutionen för mikroteknologi och nanovetenskapsv
dc.contributor.departmentChalmers University of Technology / Department of Microtechnology and Nanoscienceen
dc.description.abstractA novel technique to co-design a push-pull power amplifier and a wideband omnidirectional antenna has been investigated. The goal was to cover the frequency range from 750 MHz to 3 GHz. A biconical antenna has been simulated in Ansys HFSS and the resulting parameters were exported to AWR Microwave Office, where the remaining part of the co-design was performed. The complete design resulted in simulated values of a total gain of 11+/-1 dB and a PAE of 35% and a maximum output power of 47 dBm. The main focus of the project was to overcome the problems entailed with abandoning the standardised interface. Leaving to common interface required new, non-standardised, methods to conduct simulations.
dc.subjectElektroteknik och elektronik
dc.subjectInformations- och kommunikationsteknik
dc.subjectElectrical Engineering, Electronic Engineering, Information Engineering
dc.subjectInformation & Communication Technology
dc.titleCo-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
Collection:Examensarbeten för masterexamen // Master Theses

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.