Numerical simulations of the flow in the Francis-99 turbine

Examensarbete för masterexamen

Please use this identifier to cite or link to this item:
Download file(s):
File Description SizeFormat 
204724.pdfFulltext31.86 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: Numerical simulations of the flow in the Francis-99 turbine
Authors: Stoessel, Lucien
Abstract: In a modern electricity generation framework, hydroturbines are used to stabilise the grid and equilibrate supply variations of other renewable energy sources and are therefore often operated at off-design conditions. In this thesis, the scale model of a high-head Francis turbine is investigated at part load, best efficiency point and high load using a finite volume method in OpenFOAM. The investigated Francis-99 turbine is the subject of an upcoming workshop, and the scale model has been investigated experimentally. The geometry, an initial hexahedral mesh and the proposed operating points are therefore taken from the workshop specifications. The mesh is then adapted for the different simulations. Steady-state RANS simulations are conducted with only one guide vane and blade channel and without the spiral casing, and a mixing plane interface is used between the stationary and rotating parts. Different variants of the k-ε and k-ω turbulence models are used and a linear explicit algebraic Reynolds stress model is implemented and compared to the other models. Time-resolved URANS simulations are performed including the entire turbine geometry, using a sliding grid method with a general grid interface between the runner and the stationary parts. For the unsteady simulations, the k-ω SSTF model is implemented and used in addition to the standard k-ε model. The data from both types of simulations is compared to numerical and experimental results, and both the steady and unsteady simulations give a good prediction of the pressure distribution in the turbine. The velocity profiles at the runner outlet are well predicted at off-design conditions, but a strong swirl is obtained at best efficiency point which is not observed in the experiments. The accuracy of the velocity and pressure prediction of the mixing plane simulations is equivalent to the unsteady results, and for both types of simulations, the main differences occur in the region below the hub at the runner outlet. While the steady-state simulations overestimate the efficiency due to the assumption of axiperiodic flow in the runner and the circumferential averaging of the flow field at the mixing plane interface, the unsteady simulations give good predictions of the experimental results at best efficiency point (error of 1.16%) with larger errors at part load (10.67%) and high load (2.72%). Through the use of Fourier decomposition, the pressure fluctuations in the turbine are analysed, and the main rotor-stator interaction frequencies are predicted correctly at all operating conditions. The main pressure oscillations occur at the frequencies which are multiples of the number of guide vanes and blades. Furthermore, the feasibility of simulations with oscillations in rotational speed is examined at best efficiency point, and the added stiffness due to the fluid loading is extracted. The results show that oscillations at the frequency which is examined are not prone to resonance and divergence, but further investigation of the mechanical properties of the turbines and possible oscillation frequencies is needed for a detailed picture of the dynamical behaviour.
Keywords: Energi;Hållbar utveckling;Mekanisk energiteknik;Strömningsmekanik;Energy;Sustainable Development;Mechanical energy engineering;Fluid mechanics
Issue Date: 2014
Publisher: Chalmers tekniska högskola / Institutionen för tillämpad mekanik
Chalmers University of Technology / Department of Applied Mechanics
Series/Report no.: Diploma work - Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden : 2014:67
Collection:Examensarbeten för masterexamen // Master Theses

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.