Predictive Diesel Combustion Using DI-Pulse in GT-Power

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/225450
Download file(s):
File Description SizeFormat 
225450.pdfFulltext2.79 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVenkateshmohan, Vijayakrishnan
dc.contributor.authorKumar, Masoom
dc.contributor.departmentChalmers tekniska högskola / Institutionen för tillämpad mekaniksv
dc.contributor.departmentChalmers University of Technology / Department of Applied Mechanicsen
dc.date.accessioned2019-07-03T13:49:44Z-
dc.date.available2019-07-03T13:49:44Z-
dc.date.issued2015
dc.identifier.urihttps://hdl.handle.net/20.500.12380/225450-
dc.description.abstractRising fuel prices and stricter emission regulations have put a great demand on developing new engines with high fuel efficiency and low emissions. This has led to the development of several new concepts such as different types of EGR, variable valve timing, different injection strategies, turbulence enhancement techniques, etc. Virtual simulations, particularly 1D simulation tools for gas exchange have played a critical role in the last decade to reduce the lead time for the development of these new concepts. These simulation tools employ a 0D combustion model. However, one of their major limitation is the use of a non-predictive or fixed burn rate combustion model. With this kind of model it is not possible to evaluate the above mentioned concepts with reliability. In order to overcome this problem major tool developers such as Gamma Technologies have developed a predictive combustion model, which can predict the combustion rate based on the in cylinder conditions. But these models can provide reliable results only if they are well calibrated against test data. The aim of this thesis was to calibrate a predictive combustion model for a Diesel engine in GT-Power using the DI-Pulse combustion object. The performance of the fully calibrated model was evaluated by analysing its capability to predict key operating parameters such as IMEP, CA at 50% burn, peak pressure and NOx . In order to calibrate the model, data was collected by conducting tests in a single cylinder test cell and was subsequently validated thoroughly before using it for calibration. It was concluded that the model was able to predict the key operating parameters mentioned previously within the suggested thresholds except for NOx at low loads and low speeds and peak pressure at high loads and high speeds.
dc.language.isoeng
dc.relation.ispartofseriesDiploma work - Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden : 2015:88
dc.setspec.uppsokTechnology
dc.subjectFarkostteknik
dc.subjectEnergi
dc.subjectHållbar utveckling
dc.subjectTransport
dc.subjectVehicle Engineering
dc.subjectEnergy
dc.subjectSustainable Development
dc.subjectTransport
dc.titlePredictive Diesel Combustion Using DI-Pulse in GT-Power
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.