Manufacturing and characterisation of ultra-stiff composite material

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/256717
Download file(s):
File Description SizeFormat 
256717.pdfFulltext41.44 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJohansen, Marcus
dc.contributor.departmentChalmers tekniska högskola / Institutionen för industri- och materialvetenskapsv
dc.contributor.departmentChalmers University of Technology / Department of Industrial and Materials Scienceen
dc.date.accessioned2019-07-05T11:52:16Z-
dc.date.available2019-07-05T11:52:16Z-
dc.date.issued2019
dc.identifier.urihttps://hdl.handle.net/20.500.12380/256717-
dc.description.abstractLighter materials are needed to decrease fuel consumption in the transport industry. Conventional carbon fibre reinforced polymer composites have excellent stiffness-to-weight ratio, but are often discarded due to brittleness. This Master’s thesis work investigates a new concept of carbon fibre reinforced polymer composite material, which can prove to be lightweight, ultra-stiff, exceptionally strong and easy to mass-produce. The new material consists of chopped ultra-thin tapes of very stiff carbon fibres held together by polymer. The tape pieces are randomly distributed to give in-plane isotropy through uniform orientation distribution. To allow for characterisation of this concept, the composite material was manufactured by tapes falling randomly through a channel onto a step-wise rotating substrate to build preforms, which were formed and cured by a heat press into plates. The plates were dissected and characterised through thermal and chemical analysis, cross-section microscopy, mechanical testing and fractography. The manufactured material shows great potential with a near isotropic behaviour, average stiffness of around 65GPa and some measured tensile strengths in the vicinity of 500MPa. The high tensile strength is found to depend on two competing fracture modes: tape pullout and fibre tension failure. In conclusion, the material concept is promising and with a refined manufacturing method we can soon see a new field of composite materials.
dc.language.isoeng
dc.setspec.uppsokTechnology
dc.subjectMaterialvetenskap
dc.subjectProduktion
dc.subjectMaskinteknik
dc.subjectMaterialteknik
dc.subjectMaterials Science
dc.subjectProduction
dc.subjectMechanical Engineering
dc.subjectMaterials Engineering
dc.titleManufacturing and characterisation of ultra-stiff composite material
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.