Hydrodynamic Behaviour of a Floating Linkspan: A study on wave responses

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/303683
Download file(s):
File Description SizeFormat 
Master_s_Thesis_YousefAmiri_PouyaSheikholeslami.pdf18.04 MBAdobe PDFView/Open
Bibliographical item details
FieldValue
Type: Examensarbete för masterexamen
Title: Hydrodynamic Behaviour of a Floating Linkspan: A study on wave responses
Authors: Amiri, Yousef
Sheikholeslami, Pouya
Abstract: Maritime transport is an important part of global trade. Ro-Ro transports standing for roll-on-roll- off is a an important part of maritime transport. Ro-Ro transports is closely related to the concept of linkspan. Tide and waves can make access to quay difficult. A linkspan, as a solution is a facility to provide a good connection between shore and ship for discharging and loading. In this thesis firstly, a hydrodynamic study is performed on an integral tank linkspan to understand how environmental factors such as wave at extreme tide levels (Highest and Lowest Astronomical Tide) in combination with extreme loading conditions (Full and Empty) affect the motion of the linkspan. Secondly, a load mapping approach is performed to study the wave impacts from a structural strength perspective. This approach is based on using inertia information from the hydrodynamic or the structural model, since these are not the same. The feasibility of the load mapping approach is also assessed. Heave and pitch motion is studied in head sea (180 wave heading angle) while roll motion is studied in beam sea (90 wave heading angle) in the hydrodynamic analysis. The results have shown that at small wave periods the pitch motion is unfavorable at the highest tide level. Maximum roll motion is obtained at smaller wavelength to structure length ratio in comparison to the heave motion. The load mapping reflects the wave situation fairly good and the wave impact can be reflected in the deformation contour-plots. It is found that the maximum stress in the load mapping part is obtained at the hinges. It is also found that by using inertia from structural model a more realistic result in terms of deformation is obtained.
Keywords: potential flow;Source Distribution Method;Ansys Aqwa;Response Amplitude Operator;Finite Element Method;incident wave;diffraction wave;radiation Wave;wave spectra;heave;pitch;roll.
Issue Date: 2021
Publisher: Chalmers tekniska högskola / Institutionen för mekanik och maritima vetenskaper
Series/Report no.: 2021:64
URI: https://hdl.handle.net/20.500.12380/303683
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.