Redesign of dummy impact system test

Examensarbete för masterexamen

Please use this identifier to cite or link to this item:
Download file(s):
File Description SizeFormat 
2022-51 Nitin Davangere Anand & Priyatham Reddy Kareti.pdfMaster Thesis8.7 MBAdobe PDFView/Open
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAnand, Nitin Davangere-
dc.contributor.authorKareti, Priyatham Reddy-
dc.contributor.departmentChalmers tekniska högskola / Institutionen för mekanik och maritima vetenskapersv
dc.description.abstractWith the need for testing airbags for unbelted passenger crash scenarios, a component test setup was developed to test the passenger side airbags for the USNCAP FFRB 25 mph 50th percentile unbelted load case. This test setup simulates the physics of a frontal vehicle car crash while mimicking the kinematics of a dummy loading into the airbag. Honeycomb (HC) is used to decelerate the sled that holds the dummy interacting with the airbag. Although the HC achieves the deceleration target with a good strength-to-weight ratio, it is plastically deformed and must be discarded after each test. The purpose of this thesis is to find an alternate deceleration feature that can make the test setup configuration repeatable and robust for different load cases, thus broadening the scope of the test setup. A comparative study was conducted on different deceleration features and a damper system proved to be a good alternate to the HC when assessed with design criterias. This damper system was incorporated into the existing Computer-Aided Engineering (CAE) model, which is closely validated to the test setup using the finite element method. This report explores designing a damper with a discrete element feature available in LS DYNA, and parameter studies were conducted to understand the damper behaviour. A simplified model was built that could reproduce the physics of the crash configuration to understand the discrete element characteristic with multiple iterations. Later the finalised damper was incorporated into the full scale CAE model by replacing the honeycomb. The findings of this thesis will be useful to the industry in the future when designing a damper for various load conditions using Finite Element Analysis (FEA) in the LS DYNA
dc.subjectComponent test rigsv
dc.subjectDamper modellingsv
dc.subjectCrash deceleration featuresv
dc.subjectLS DYNAsv
dc.subjectFinite elementsv
dc.titleRedesign of dummy impact system testsv
dc.type.degreeExamensarbete för masterexamensv
dc.contributor.examinerThomson, Robert-
dc.contributor.supervisorLandholm, Robert-
dc.contributor.supervisorAsk, Stefan-
Collection:Examensarbeten för masterexamen // Master Theses

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.