Digital filters - Computable efficient recursive filters

Examensarbete på grundnivå

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/74710
Download file(s):
File Description SizeFormat 
74710.pdfFulltext618.05 kBAdobe PDFView/Open
Type: Examensarbete på grundnivå
Title: Digital filters - Computable efficient recursive filters
Authors: Engelbert, Anna
Hallqvist, Carl
Abstract: In signal processing, the most widely used digital filter type is the Finite Impulse Response (FIR), mainly for its guaranteed stability. However, these filters requiring a higher order for the same specification compared with its recursive correspondence, the Infinite Impulse Response (IIR) filter. The order can be seen as required number of adders, multipliers and memory for the filter. In Application Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) applications, especially number of multipliers is desirable to keep low due the extensive logic. Hence, signal processing with FIR filters will result in a large amount of silicon or gates used. This thesis proposes two recursive filters, the Cascaded Integrator Comb- (CIC) filter and the Wave Digital Filter (WDF), where the former is used mainly for interpolation- or decimation. The CIC is a recursive moving average filter which is multiplier free, consisting only of two building blocks and has a linear phase. The WDFs simulates an analog lossless network, such as the ladder- or the lattice structure by using the bilinear transform and voltage waves as signal parameters. For fair comparison of the filters, methods for estimating the hardware cost are developed. A FIR halfband filter is also included and may be seen as a reference in both hardware cost and performance. For comparing performance Error Vector Magnitude (EVM) and Adjacent Channel Leakage Ratio is used, according the method described in 3GPP (3rd Generation Partnership Project). Moreover, interpolation and decimation is handled in a mathematical way to show the importance of using good lowpass filters in multirate systems.
Keywords: Elektroteknik och elektronik;Övrig annan teknik;Electrical Engineering, Electronic Engineering, Information Engineering;Other Engineering and Technologies not elsewhere specified
Issue Date: 2008
Publisher: Chalmers tekniska högskola / Institutionen för signaler och system
Chalmers University of Technology / Department of Signals and Systems
Series/Report no.: Ex - Institutionen för signaler och system, Chalmers tekniska högskola : 057
URI: https://hdl.handle.net/20.500.12380/74710
Collection:Examensarbeten på grundnivå // Basic Level Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.