The IGBT test set-up design
Examensarbete för masterexamen
Please use this identifier to cite or link to this item:
There are no files associated with this item.
|Type: ||Examensarbete för masterexamen|
|Title: ||The IGBT test set-up design|
|Authors: ||Liu, Kun|
|Abstract: ||An experimental half bridge converter setup is designed in order to explore the switching characteristics and losses of a new type of IGBT module. A specific digital control circuit and a drive circuit for an IGBT are designed and integrated into one PCB which can provide different kinds of precise IGBT gate signals. The switching characteristics and losses are investigated under different parameters both in a hardware and a simulation. It can be observed that the switching losses are increasing with the increase of voltage and current levels. Increasing the gate resistance also tends to increase the IGBT switching losses, while the reverse recovery losses of the free-wheeling diode decrease. The switching characteristics of the IGBT are not affected by temperature, but the reverse recovery losses increase with the temperature. The stray inductance has a negative effect, since it causes the oscillation both in the voltage and current waveforms.|
|Keywords: ||Elektroteknik;Elektronik;Electrical engineering;Electronics|
|Issue Date: ||2008|
|Publisher: ||Chalmers tekniska högskola / Institutionen för energi och miljö|
Chalmers University of Technology / Department of Energy and Environment
|Collection:||Examensarbeten för masterexamen // Master Theses|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.