Assisted precision maneuvering of truck and semi-trailer onto a railway wagon: Proof of Concept implementation of a system for assisted reverse maneuvering of truck and semi-trailer combinations

Hämtar...
Bild (thumbnail)

Publicerad

Typ

Examensarbete för masterexamen
Master's Thesis

Modellbyggare

Tidskriftstitel

ISSN

Volymtitel

Utgivare

Sammanfattning

Intermodal transport has gained increasing attention in recent years as a means of combining multiple modes of freight transport — typically road, rail, and sea, to lower emissions from road based logistics. One approach to road-rail transshipment is horizontal Ro-Ro (Roll-on/Roll-off) loading, in which a tractor and semi-trailer reverses directly onto a rail wagon without the need for crane lifting or specialized trailer reinforcement. The maneuver requires the driver to reverse the combination in a constrained area, align the trailer precisely with the wagon, and complete the final docking at a near-perpendicular angle between the tractor and trailer — all within tight lateral tolerances and often without dedicated sensing or guidance infrastructure. Precision reverse maneuvering of articulated truck-trailer combinations is inherently challenging due to limited rearward visibility, instability of the articulation angle during reverse motion, and the vehicle’s nonholonomic constraints, making the repeatable execution of such maneuvers difficult even for experienced drivers. In space-constrained environments such as road-to-rail intermodal terminals, maneuvering errors can lead to delays and safety risks, ultimately reducing the throughput of the transshipment process. This thesis presents a framework for implementing a driver assistance system designed to reduce the time and workload associated with horizontal Ro-Ro loading maneuvers. The proposed solution integrates four subsystems: a LiDAR-based perception pipeline, a path planner, a path-following controller, and a driver user interface. The framework is implemented in Simulink and enables closed-loop operation on a real vehicle. Results confirm that the proposed approach is technically feasible and that the individual subsystems function as intended, with limitations related to real-time LiDAR data streaming, and articulation angle control identified as areas requiring further development.

Beskrivning

Ämne/nyckelord

LiDAR, vehicle detection, path planning, path following control

Citation

Arkitekt (konstruktör)

Geografisk plats

Byggnad (typ)

Byggår

Modelltyp

Skala

Teknik / material

Index

Endorsement

Review

Supplemented By

Referenced By