Ice Class Requirements on Side Shell Structures - A comparison of local strength class requirements regarding plastic design of ice-reinforced side shell structures

Visa enkel post
dc.contributor.authorBergbom Wallin, Filip
dc.contributor.authorÅkerström, Carl-Johan
dc.contributor.departmentChalmers tekniska högskola / Institutionen för sjöfart och marin tekniksv
dc.contributor.departmentChalmers University of Technology / Department of Shipping and Marine Technologyen
dc.date.accessioned2019-07-03T12:58:30Z
dc.date.available2019-07-03T12:58:30Z
dc.date.issued2012
dc.description.abstractThe demand for shipping in Arctic regions is increasing, and with this comes an increased interest in ice-strengthened ships. Today there exist several class rules satisfying additional requirements for operation in geographical areas with ice-infested waters. Hence, it is crucial for classification societies, designers and ship-owners to understand how formulations of each rule-set impact on structural members to be able to design a ship that suits a certain operational purpose. The aim of this thesis is to perform a comparison study on structural properties and steel grades on mid-bodies with a constant cross section, regarding ice-strengthening requirements relevant in the icereinforced region. To provide an overview of fundamental differences of ice class rule-sets, a comparison is conducted through case studies in which three different fictitious ships are used. The rule formulations of Det Norske Veritas (DNV), Finnish-Swedish Ice Class Rules (FSICR), IACS Polar Class and the Russian Maritime Register of Shipping (RS) are compared with an emphasis on the local structure and material requirements. Since the comparison is focused on rule-sets, no numerical analysis on the strength is considered. To enable comparisons between class rules, a computer code is developed where the rule-sets are adopted. The computer code uses ship particulars together with rule formulations to calculate the outcome on the actual local strength of each rule-set. Main parameters, i.e. frame spacing, direction of frames, displacement and yield strength in the rule formulation are varied in order to find their influence on the weight and structural properties. In addition to this, issues in the results are identified together with recommendations of areas that need to be further looked into with a numerical analysis on the actual structure. The comparison shows that the direction of framing plays a major role in the reinforcements needed and the total weight outcome on mid-bodies with a constant cross section. Due to the shape of the ice load, transverse framing has favourable requirements on local design in the perspective of weight. The result has been validated with the DNV software Nauticus Hull. It is found that when designing a ship according to notations with higher requirements, “tailormade” beam profiles may result in a better distribution of structural safety margins and a lighter structure. The study also shows that requirements on steel grade depending on structural member and thickness vary between rule-sets. It is concluded that using steel with higher yield strength can be economical since it may result in a lower requirement on the grade and less material in the structure. The study shows a case with a weight-saving of 9% and a cost-saving of 5% when upgrading the yield strength. To be aware of these behaviours one can benefit from this and design an approved structure that fulfils the requirements with reduced weight and cost.
dc.identifier.urihttps://hdl.handle.net/20.500.12380/162631
dc.language.isoeng
dc.relation.ispartofseriesReport. X - Department of Shipping and Marine Technology, Chalmers University of Technology, Göteborg, Sweden : 277
dc.setspec.uppsokTechnology
dc.subjectFarkostteknik
dc.subjectTransport
dc.subjectVehicle Engineering
dc.subjectTransport
dc.titleIce Class Requirements on Side Shell Structures - A comparison of local strength class requirements regarding plastic design of ice-reinforced side shell structures
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
dc.type.uppsokH
Ladda ner
Original bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
162631.pdf
Storlek:
2.77 MB
Format:
Adobe Portable Document Format
Beskrivning:
Fulltext
Ladda ner
Samling
Examensarbeten för masterexamen