Modelling and simulation of electro-pneumatic parking brake system for real time estimation of pressure inside parking brake chamber.

Visa enkel post
dc.contributor.authorSoudagar, Irfan Ahmed Khan
dc.contributor.authorTota, Pranay Damodhar
dc.contributor.departmentChalmers tekniska högskola / Institutionen för mekanik och maritima vetenskapersv
dc.contributor.examinerJacobson, Bengt
dc.contributor.supervisorTuvehed, Petter
dc.contributor.supervisorArikan, Ahmet
dc.date.accessioned2022-09-27T14:02:27Z
dc.date.available2022-09-27T14:02:27Z
dc.date.issued2022sv
dc.date.submitted2020
dc.description.abstractAs a master thesis project, this research was conducted out at Scania CV AB’s Brake Functions Department. This project is focused on the development of a model-based pressure estimator for electro-pneumatic parking brake chambers. The Electro-pneumatic Parking Brake System (EPB), which is now along with the Electronic Brake System (EBS), has a distinct pneumatic circuit dedicated entirely to the parking brake application; conse quently, knowing the pressure inside the parking brake chamber is crucial if the parking brakes are to be engaged as backup brakes or autonomous stopping. The thesis paper is concerned with the development of a mathematical model of an electro pneumatic parking brake system based on the physical layout of the brake system. First two chapters of the report deals with the introduction and background of brake systems and it’s components. Chapter 3 & 4 of the report deals with the methodology, approach, theory and the development of simulink model for each of the components present in the brake circuit. The developed model take the inputs from the EPB module and further estimates the pressure considering the physical parameters of all the components on the brake system. Final part of the report deals with the implementation of model in real-time test scenario and comparison with the measured pressure followed by the conclusion and future work.sv
dc.identifier.coursecodeMMSX30sv
dc.identifier.urihttps://hdl.handle.net/20.500.12380/305660
dc.language.isoengsv
dc.relation.ispartofseries2022:57sv
dc.setspec.uppsokTechnology
dc.subjectPressure Estimationsv
dc.subjectElectro-Pneumatic Braking Systemsv
dc.subjectSimulinksv
dc.subjectPnuematic Actuatorssv
dc.subjectModelling and Simulationsv
dc.subjectCommercial Vehicle Brakessv
dc.titleModelling and simulation of electro-pneumatic parking brake system for real time estimation of pressure inside parking brake chamber.sv
dc.type.degreeExamensarbete för masterexamensv
dc.type.uppsokH
local.programmeAutomotive engineering (MPAUT), MSc
Ladda ner
Original bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
2022-57 Irfan Ahmed Khan Soudagar & Pranay Damodhar Tota.pdf
Storlek:
15.1 MB
Format:
Adobe Portable Document Format
Beskrivning:
Master thesis
Ladda ner
License bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
license.txt
Storlek:
1.51 KB
Format:
Item-specific license agreed upon to submission
Beskrivning:
Ladda ner
Samling
Examensarbeten för masterexamen