Microplastic Release after Laundry of Synthetic Garments

dc.contributor.authorGKIRINI, ANTHI
dc.contributor.departmentChalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE)sv
dc.contributor.examinerHvitt-Strömvall, Ann-Margret
dc.date.accessioned2019-08-23T10:06:05Z
dc.date.available2019-08-23T10:06:05Z
dc.date.issued2019sv
dc.date.submitted2019
dc.description.abstractPlastic pollution is widely considered to an alarming problem due to the presence of plastics in water, soil and air. Microplastics are estimated to be the 3rd largest source of plastic pollution detected so far ending up in the marine environment. Microplastics can be a result of land based sources which can either come from care and cleansing products (e.g. toothpaste), breakdown products (e.g. fibers from synthetic textile, particles derived from car tyres) or deterioration of larger debris (e.g. plastic bags). Their main pathways are through stormwater, wastewater or direct release to sea. Their effects are largely unknown, although microplastics have been found in biota and in the human food web (e.g. in the salt, honey, etc). The amount of microplastics emitted from laundry remains very uncertain, with published emission rates ranging over several orders of magnitude. The aim of the thesis is to estimate the release of microplastics fibers from synthetic clothing after washing under specified conditions. A method to collect samples is developed and applied to the washing of different materials. The release is estimated in both relative fiber weight and particle numbers. Additionally, the effects of repeated washing and use of the clothes were investigated and related to their initial release. Finally, complementary results were obtained by microscopy analysis, including measurement of fiber size and characterization of textiles. The results show that the estimation of fiber emission from laundry is a challenging procedure. There is no standard method available and the quantification of emission rates in weight or particle number is affected by factors including the pore size of the filters, the presence of additives in textiles, the possible presence of environmental particles on the textiles and the large particle numbers. It is however clear from this study that microplastic fibers are released from laundry. Measured fiber emissions were found to be in the range of 97-2,3 mg per kg of textile or 0.8-2.6 million fibers per kg of textile (calculated taking into account the average number after use). Repeated washing caused a decrease in fiber emission. In contrast use of the textiles caused an increase in emissions. Microscopic observation of the textiles after washing and use clearly show deterioration of the materials that might explain the higher emission after use. This study supports that the emission of fibers from laundry significantly contributes to the environmental microplastic load, even if some of the emitted fibers are retained by wastewater treatment plants.sv
dc.identifier.coursecodeACEX30sv
dc.identifier.urihttps://hdl.handle.net/20.500.12380/300167
dc.language.isoengsv
dc.relation.ispartofseriesACEX30-19-94sv
dc.setspec.uppsokTechnology
dc.subjectmicroplasticssv
dc.subjectsynthetic textilesv
dc.subjectlength distributionsv
dc.subjectdiameter distributionsv
dc.subjectESEM analysissv
dc.subjectEDAX analysissv
dc.subjectannual releasesv
dc.titleMicroplastic Release after Laundry of Synthetic Garmentssv
dc.type.degreeExamensarbete för masterexamensv
dc.type.uppsokH
local.programmeInfrastructure and environmental engineering (MPIEE), MSc
Ladda ner
Original bundle
Visar 1 - 1 av 1
Hämtar...
Bild (thumbnail)
Namn:
ACEX30-19-94 Anthi Gkirini.pdf
Storlek:
5.73 MB
Format:
Adobe Portable Document Format
Beskrivning:
License bundle
Visar 1 - 1 av 1
Hämtar...
Bild (thumbnail)
Namn:
license.txt
Storlek:
1.14 KB
Format:
Item-specific license agreed upon to submission
Beskrivning: