Clips and brackets. Assembly & Disassembly Force

dc.contributor.authorFernández Schmidt, Alejandro
dc.contributor.authorFernández del Olmo Heres, Mariana
dc.contributor.departmentChalmers tekniska högskola / Institutionen för tillämpad mekaniksv
dc.contributor.departmentChalmers University of Technology / Department of Applied Mechanicsen
dc.description.abstractSome of the core values shared by Volvo Car Corporation are safety and health of their employees, for this reason the company needs fast, reliable and accuracy tools that allows the verification of security and ergonomic criteria’s. This research is focused on simulating the forces needed to assembly and disassembly the fuel lines into the clip all around the fuel system, since the actual verification method is the real test made after its manufacture. In order to obtain a good simulation tool, during the research period several task are performed such us: simulations of two different clip models with their respective parameter changing and setting, real tests of those models, study of the behaviour of the material, correlation between results and redesigns in one of the models. The obtained results and the correlations show different conducts, in some cases, the simulation gives values really close to the reality, and in other cases, the values are a bit different. However, in general terms the behaviour of the clip is really close to the reality. As a result, it can be assumed that the simulation´s methodology achieved could not replace the actual verification method, but it can be used as a verification method for the early stages, in a complementary way, allowing monetary and time saving. Key words: Fuel lines; Automotive; Simulation; FEM; Abaqus; ANSA; Test; Polyamide; Volvo Car Corporation; Assembly force; Pull-off force; Correlation; Recommendations; Design
dc.relation.ispartofseriesDiploma work - Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden : 2017:16
dc.subjectTeknisk mekanik
dc.subjectBearbetnings-, yt- och fogningsteknik
dc.subjectApplied Mechanics
dc.subjectVehicle Engineering
dc.subjectManufacturing, Surface and Joining Technology
dc.titleClips and brackets. Assembly & Disassembly Force
dc.type.degreeExamensarbete för masterexamensv
dc.type.degreeMaster Thesisen
local.programmeApplied mechanics (MPAME), MSc
Ladda ner
Original bundle
Visar 1 - 1 av 1
Bild (thumbnail)
2.86 MB
Adobe Portable Document Format