Model Updating and Calibration of a Finite Element Model of Marine Propeller Through Measurements and Simulation

Hämtar...
Bild (thumbnail)

Publicerad

Typ

Examensarbete för masterexamen
Master's Thesis

Modellbyggare

Tidskriftstitel

ISSN

Volymtitel

Utgivare

Sammanfattning

This thesis presents a practical workflow for calibrating finite-element (FE) models to experimental modal data for structures tested in air and in water. The method follows a frequency-response based calibration with damping equalization so that measured and simulated frequency responses can be compared in a consistent way before parameter tuning [Abrahamsson and Kammer, 2015]. For submerged cases, the fluid is modeled as a potential-based acoustic domain to account for added mass and radiation damping in line with standard fluid-structure interaction (FSI) theory [Richter, 2017]. The study is organized in two stages. First, a suspended plate is used as a benchmark to develop the end-to-end pipeline; second, the workflow is transferred to a marine propeller with practical constraints on where excitation and sensing can be performed. Roving-hammer testing provides single-output, multi-input frequency response func tions. The computational toolchain combines ANSA for geometry, meshing, and cou pling definition, ADINA for coupled structure-acoustic eigenanalysis, META for post processing and data export, and Python scripts for peak selection, mode pairing, objec tive construction, and optimization. The calibration proceeds in a frequency-only stage with gated peak pairing to avoid mode swapping, followed by an optional magnitude stage that uses per-input gain factors to accommodate test variability. The workflow, scripts, and configuration files are designed to be reproducible and transferable, en abling application to both suspended and submerged configurations while documenting assumptions and limitations that arise from test setup and identifiability considerations [Richter, 2017].

Beskrivning

Ämne/nyckelord

FRF calibration, damping equalization, model reduction, MAC, added mass, radiation damping, Fluid-Structure Interaction

Citation

Arkitekt (konstruktör)

Geografisk plats

Byggnad (typ)

Byggår

Modelltyp

Skala

Teknik / material

Index

Endorsement

Review

Supplemented By

Referenced By