Evaluation of Part Dimensions for Additive Manufacturing, Metal Binder Jetting

Visa enkel post
dc.contributor.authorHall, Emilia
dc.contributor.authorAndersson, Louise
dc.contributor.departmentChalmers tekniska högskola / Institutionen för industri- och materialvetenskapsv
dc.contributor.examinerHammersberg, Peter
dc.contributor.supervisorHosseini, Seyed
dc.contributor.supervisorHammersberg, Peter
dc.date.accessioned2021-06-21T08:41:00Z
dc.date.available2021-06-21T08:41:00Z
dc.date.issued2021sv
dc.date.submitted2020
dc.description.abstractThe concept of Additive manufacturing (AM) was introduced already in the 1970’s as mentioned in (Wholers et al., 2016) and the first commercial system were introduced in the late 1980’s, this type of manufacturing is relatively new. When using AM technology, the components are manufactured by adding the material layer-by-layer and selectively where needed. Plastic materials were first used and since then, several AM-technologies has been launched with a larger selection of materials. This bachelor’s thesis was made at Research Institutes of Sweden (RISE) IVF AB. The main purpose of the thesis was to set the base for creating a design guideline for one of the additive manufacturing technologies, specifically Metal Binder Jetting. Literature review was used as base for the information around the technology and existing guidelines, but we have also performed interviews as well as discussed directly with one machine and service provider, Digital Metal AB. Most of the information as found with respect to the design guidelines were of general character. The information is intended to be compiled into a guide with the initial purpose of designers with low or limited knowledge of design for MBJ. Therefore, it was decided to print artifacts with help from Digital Metal AB to be able to set the base for what is viable and not, connected to the design rules. The printed parts were evaluated with manual inspections.sv
dc.identifier.coursecodeIMSX20sv
dc.identifier.urihttps://hdl.handle.net/20.500.12380/302640
dc.language.isoengsv
dc.setspec.uppsokTechnology
dc.subjectAdditive manufacturing (AM)sv
dc.subjectDesign guidelinesv
dc.subjectmetal 3D-printingsv
dc.subject3D-scanningsv
dc.subjectMetal Binder Jetting (MBJ)sv
dc.subjectISO-standardssv
dc.titleEvaluation of Part Dimensions for Additive Manufacturing, Metal Binder Jettingsv
dc.type.degreeExamensarbete på kandidatnivåsv
dc.type.uppsokM2
Ladda ner
Original bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
Andersson, L., Hall, E., Evaluation of Part Dimensions for Additive Manufacturing, Metal Binder Jetting, MI2021, Chalmers.pdf
Storlek:
1.74 MB
Format:
Adobe Portable Document Format
Beskrivning:
Ladda ner
License bundle
Visar 1 - 1 av 1
Bild (thumbnail)
Namn:
license.txt
Storlek:
1.14 KB
Format:
Item-specific license agreed upon to submission
Beskrivning:
Ladda ner
Samling
Examensarbeten för kandidatexamen