CFD Modeling of an Air-Cooled Data Center

Examensarbete för masterexamen

Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12380/219609
Download file(s):
File Description SizeFormat 
219609.pdfFulltext2.31 MBAdobe PDFView/Open
Type: Examensarbete för masterexamen
Master Thesis
Title: CFD Modeling of an Air-Cooled Data Center
Authors: Wibron, Emelie
Abstract: Fortlax is an air-cooled data center in Norrbotten. The potential of future investments in data centers is prosperous, but sustainability is an increasingly important factor. It is important to make sure that the data centers are sufficiently cooled while too much forced cooling leads to economical losses and a waste of energy. The purpose of this thesis is to develop a CFD model of a server room at Fortlax data center that accurately predicts the temperature and flow field. The goal is to develop the CFD model in order to evaluate different cooling systems and also improve the placement of the server racks. Most of the server racks are only half full at the moment, but the heat load is supposed to increase in the near future. Therefore, it has been assumed that all the server racks generate full heat load. The commercial CFD software ANSYS CFX 16.0 has been used to perform the simulations. The current cooling system with the current placement of the server racks resulted in some insufficiently cooled server racks. The performance of the cooling system was significantly improved when the hard-floor configuration was replaced by a raised-floor configuration. The design strategy based on hot/cold-aisles has become the standard when raised-floor configurations are used. However, the raised-floor configuration with parallel rows of server racks turned out to be the setup that performed best based on the performance metrics that were used to evaluate the results in this thesis.
Keywords: Energi;Hållbar utveckling;Strömningsmekanik;Energy;Sustainable Development;Fluid mechanics
Issue Date: 2015
Publisher: Chalmers tekniska högskola / Institutionen för tillämpad mekanik
Chalmers University of Technology / Department of Applied Mechanics
Series/Report no.: Diploma work - Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden : 2015:31
URI: https://hdl.handle.net/20.500.12380/219609
Collection:Examensarbeten för masterexamen // Master Theses



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.