Förbättring av filamentmatningsteknik för ökad effektivitet hos FDM 3D-skrivare
| dc.contributor.author | Stenmark, Jonatan | |
| dc.contributor.author | Gustafsson, Emil | |
| dc.contributor.department | Chalmers tekniska högskola / Institutionen för industri- och materialvetenskap | sv |
| dc.contributor.department | Chalmers University of Technology / Department of Industrial and Materials Science | en |
| dc.contributor.examiner | Melkersson, Kjell | |
| dc.contributor.supervisor | Melkersson, Kjell | |
| dc.date.accessioned | 2024-10-04T07:45:31Z | |
| dc.date.available | 2024-10-04T07:45:31Z | |
| dc.date.issued | 2024 | |
| dc.date.submitted | ||
| dc.description.abstract | This report presents the development of an extruder for a Fused Deposition Modelling 3D-printer. The aim of the report was to create a more time- and cost-efficient, as well as a more environmentally friendly, extruder solution. To achieve this, user surveys, tests, and analyses of competitors' solutions were conducted to identify common problems and strengths of extruders. Based on these insights, a prototype was developed, see figure 0.2, featuring feed wheels with an 8 mm inner diameter to ensure smooth output and minimize extrusion errors. The chassi was made of HDPE with 30% fiberglass to provide the extruder with low weight, cost, and environmental impact. The conclusion was that the new design was time- and cost-efficient and reduced environmental impact | |
| dc.identifier.coursecode | IMSX20 | |
| dc.identifier.uri | http://hdl.handle.net/20.500.12380/308850 | |
| dc.language.iso | swe | |
| dc.setspec.uppsok | Technology | |
| dc.title | Förbättring av filamentmatningsteknik för ökad effektivitet hos FDM 3D-skrivare | |
| dc.type.degree | Examensarbete på grundnivå | sv |
| dc.type.uppsok | M | |
| local.programme | Maskinteknik 180 hp (högskoleingenjör) |